Toshiba TECRA A9 Series Maintenance Manual

4.12 Optical drive 4 Replacement Procedures
TECRA A9/TECRA S5/TECRA P5/Satellite Pro S200 Maintenance Manual (960-633) [CONFIDENTIAL] 4-35
Installing the Optical drive
To install the optical drive, follow the steps below and refer to Figure 4-19 and 4-20.
1. Set the mounting plate and secure it with the following screw.
• M2×3C S-THIN HEAD screw ×1
2. Set the pushing plate and secure it with the following screws.
• M2×2.7C S-THIN HEAD screw ×2
3. Insert the optical drive into the slot and push it until it is firmly connected to the
connector on the system board.
4. Turn over the computer and secure the optical drive with the following screw.
• M2.5×6B FLAT HEAD screw ×1

Toshiba TECRA A9 Series Specifications

General

Processor	Intel Core 2 Duo
Display	15.4-inch
Display Resolution	1280 x 800 pixels
RAM	Up to 4 GB
Operating System	Windows Vista
Optical Drive	DVD-RW
Wireless	802.11a/g/n
Ports	USB 2.0, VGA, Ethernet, Headphone