4.25 Cover latch 4 Replacement Procedures
4.25 Cover latch
Removing the Cover latch
To remove the cover latch, follow the steps below and refer to Figure 4-47.
1. Remove the latch knob while pushing three hooks.
2. Remove the latch hook.
CAUTION: Be careful not lose the spring.
Latch knob
Latch hook
Spring
Hook
Hook
Figure 4-47 Removing the cover latch
Installing the Cover latch
To install the cover latch, follow the steps below and refer to Figure 4-47.
1. Insert the stick of the latch hook into the spring.
2. Install the latch hook in place.
3. Set the latch knob and push it until the hooks are engaged to the latch hook.
TECRA A9/TECRA S5/TECRA P5/Satellite Pro S200 Maintenance Manual (960-633) [CONFIDENTIAL] 4-75
To Next Page
Loading...
