Toshiba TECRA A9 Series Maintenance Manual

4 Replacement Procedures 4.15 Fingerprint sensor board
4.15 Fingerprint sensor board
Removing the Fingerprint sensor board
To remove the fingerprint sensor board, follow the steps below and refer to Figure 4-25 and
4-26.
1. Push the hook down and remove the fingerprint sensor board hold plate while
sliding it from the guides in the direction of the arrow in the figure below.
2. Peel off the glass tape.
Glass tape
Fingerprint sensor board hold plate
Hook
Guide
Figure 4-25 Removing the fingerprint sensor board hold plate
4-42 [CONFIDENTIAL] TECRA A9/TECRA S5/TECRA P5/Satellite Pro S200 Maintenance Manual (960-633)

Toshiba TECRA A9 Series Specifications

General

Processor	Intel Core 2 Duo
Display	15.4-inch
Display Resolution	1280 x 800 pixels
RAM	Up to 4 GB
Operating System	Windows Vista
Optical Drive	DVD-RW
Wireless	802.11a/g/n
Ports	USB 2.0, VGA, Ethernet, Headphone