3 Tests and Diagnostics 3.25 System Configuration
3-58 [CONFIDENTIAL] TECRA A9(S5/P5/S200) Maintenance Manual (960-631)
3
3.25 System Configuration
3.25.1 Function Description
NOTE: To display the system configuration, the write protect tab should be OFF
position. If the tab is ON position, move the tab to OFF position and restart the
test. Otherwise the correct information cannot be acquired.
The System Configuration program contains the following configuration information for the
computer:
1. Processor Type [Code/L2 cache]
2. Chip set [VRAM]
3. BIOS ROM version [1st ID, 2nd ID]
4. Boot ROM version
5. EC total version
6. PS Microprocessor version
7. SVP Par. version
8. Microcode Revision
9. Total Memory Size [Conventional memory]
10. Battery code
11. HWSC
12. FSB [Voltage]
13. 0 Printer Adapter
14. 1 ASYNC Adapter
15. 1 Math co-processors
16. 1 Floppy Disk Drive [Track/Head/Sector]
17. 1 Hard Disk Drive [Sector/Drive size/Manufacture code]
18. ODD Drive
19. T&D total version
To Next Page
Loading...
Need help?
General
