3 Tests and Diagnostics 3.30 BIOS SETUP
3-90 [CONFIDENTIAL] TECRA A9(S5/P5/S200) Maintenance Manual (960-633)
Are you sure? (Y/N)
The changes you made will cause the system to reboot.
2. To make other changes, press N. Repeat the steps above.
3. To accept the changes, press Y.
NOTE: You can press Esc to quit at any time without saving changes. SETUP asks you
to confirm that you do not want to save your changes. When SETUP is displayed
at the next time, the current configuration appears.
The Factory Preset Configuration
When you access SETUP, the current configuration is displayed.
1. To show the factory preset configuration, press Home.
2. Press End and then press Y to accept the factory preset settings.
NOTE: When you execute the default setting, the following settings are not changed:
Password
Execute-Disable Bit function
To Next Page
Loading...
