3.30 BIOS SETUP 3 Tests and Diagnostics
TECRA A9(S5/P5/S200) Maintenance Manual (960-633) [CONFIDENTIAL] 3-103
17. Security controller
(a) TPM
Disables the security controller called TPM (Trusted Platform Module).
When the cursor is on the Enable (Disable) and the Space is pressed,
message is displayed and the PC waits Y or N key input by the user.
When Y is pressed, it is sets to Enable (Disable). After changing, the cursor
could not be moved on the TPM tem. This option can be changed after
rebooting.
Disabled Disables the TPM. (Default)
Enabled Enables the TPM.
(b) Clear TPM Owner
This is not displayed when the TPM is set to Disabled. This is executed,
when the PC is disposed or the owner of the PC changes.
When the cursor is on this item and the Space is pressed, message is
displayed and the PC waits Y, E, S and Enter key inputs by the user.
When Y, E, S and Enter keys are pressed, the data is disposed.
After changing, the display of TPM item is changed to Disabled and this item
becomes not displayed and the cursor could not be moved on the TPM item.
To Next Page
Loading...
