Toshiba TECRA A9 Series Maintenance Manual

4.21 HDD cable/LAN jack/RGB board cable 4 Replacement Procedures
TECRA A9/TECRA S5/TECRA P5/Satellite Pro S200 Maintenance Manual (960-633) [CONFIDENTIAL] 4-61
Installing the HDD cable/LAN jack/RGB board cable
To install the HDD cable/LAN jack/RGB board cable, follow the steps below and refer to
Figure 4-35.
1. Connect the LAN jack and RGB board cable to the connector CN4100 and CN9500
on the system board.
2. Connect the HDD cable to the connector CN1900 on the system board and stick the
insulator in place.

Toshiba TECRA A9 Series Specifications

General

Processor	Intel Core 2 Duo
Display	15.4-inch
Display Resolution	1280 x 800 pixels
RAM	Up to 4 GB
Operating System	Windows Vista
Optical Drive	DVD-RW
Wireless	802.11a/g/n
Ports	USB 2.0, VGA, Ethernet, Headphone