4.22 North bridge (and GPU) heat sink/CPU heat sink/Fan/CPU 4 Replacement Procedures
TECRA A9/TECRA S5/TECRA P5/Satellite Pro S200 Maintenance Manual (960-633) [CONFIDENTIAL] 4-69
12. Install the North bridge and GPU heat sink in place. (In the case of the GPU
model.)
13. Install the North bridge and GPU hold plate on the North bridge and GPU heat sink
and secure them with the following screws (Secure the circled portion first in the
figure 4-35.). (In the case of the GPU model.)
• M2×4B BIND screw ×4
14. Install the North bridge heat sink in place. (In the case of the Built-in GPU model.)
15. Install the North bridge hold plate on the North bridge heat sink and secure them
with the following screws in the order of the number marked on the North bridge
hold plate. (In the case of the Built-in GPU model.)
• M2×4B BIND screw ×3
To Next Page
Loading...
