2 Troubleshooting Procedures 2.14 Bluetooth Troubleshooting
2-58 [CONFIDENTIAL] TECRA M10 Maintenance Manual (960-685)
Check 2 The Bluetooth module may be damaged. Replace it with a new one following the
instructions in Chapter 4, Replacement Procedures and check the operation. If the
problem still exists, perform Check 3.
Check 3 The Bluetooth cable may be damaged. Replace it with a new one following the
instructions in Chapter 4, Replacement Procedures. If the problem still exists,
perform Check 4.
Check 4 The system board may be damaged. Replace it with a new one following the
instructions in Chapter 4, Replacement Procedures.
To Next Page
Loading...
