Toshiba Tecra M10 - Installing the Hinge

4.34 Hinge 4 Replacement Procedures
TECRA M10 Maintenance Manual (960-685) [CONFIDENTIAL] 4-109
Installing the Hinge
To install the hinge, follow the steps below and refer to Figure 4-66 and 4-67.
1. Set the brake hinge R in place and secure it with the following screws.
• M2.5×6C Tapping screw ×2
2. Set the brake hinge L while engaging two hooks and secure it with the following
screw.
• M2.5×6C Tapping screw ×1