Toshiba Tecra M10 - Page 230

4 Replacement Procedures
4-vi [CONFIDENTIAL] TECRA M10 Maintenance Manual (960-685)
Figure 4-31 Removing the MDC modem........................................................................ 4-50
Figure 4-32 Removing the USB board............................................................................4-51
Figure 4-33 Removing the RGB harness......................................................................... 4-53
Figure 4-34 Removing the RJ45 harness......................................................................... 4-54
Figure 4-35 Removing the serial board...........................................................................4-56
Figure 4-36 Removing the system board ........................................................................4-59
Figure 4-37 Removing the DC-IN harness/HDD harness............................................... 4-60
Figure 4-38 Removing the GFX board/GFX fin (1)........................................................ 4-62
Figure 4-39 Removing the GFX board/GFX fin (2)........................................................ 4-63
Figure 4-40 Removing the CPU fin/DC fan (1) .............................................................. 4-65
Figure 4-41 Removing the CPU fin/DC fan (2) .............................................................. 4-66
Figure 4-42 Removing the CPU...................................................................................... 4-67
Figure 4-43 Installing the CPU........................................................................................4-68
Figure 4-44 Applying new grease ...................................................................................4-69
Figure 4-45 Removing the PC card unit.......................................................................... 4-70
Figure 4-46 Removing the RTC battery.......................................................................... 4-72
Figure 4-47 Removing the sound board/microphone harness......................................... 4-74
Figure 4-48 Removing the battery lock........................................................................... 4-76
Figure 4-49 Removing the touch pad/fingerprint sensor board (1).................................4-78
Figure 4-50 Removing the touch pad/fingerprint sensor board (2).................................4-79
Figure 4-51 Removing the touch pad/fingerprint sensor board (3).................................4-80
Figure 4-52 Removing the touch pad/fingerprint sensor board (4).................................4-81
Figure 4-53 Removing the Bluetooth module................................................................. 4-83
Figure 4-54 Removing the Smart card unit ..................................................................... 4-84
Figure 4-55 Releasing the harnesses ...............................................................................4-86
Figure 4-56 Removing the LCD cover............................................................................4-87
Figure 4-57 Removing the FL inverter............................................................................ 4-88
Figure 4-58 Removing the LCD unit (1)......................................................................... 4-89
Figure 4-59 Removing the LCD unit (2)......................................................................... 4-90
Figure 4-60 Removing the camera module/wireless LAN antenna/3G antenna.............4-92
Figure 4-61 Removing the LCD harness (1) ................................................................ 4-101
Figure 4-62 Removing the harness holder L ................................................................. 4-102