TP-Link T2500G-10TS - Page 16

6
Chapter
Introduction
Chapter 14 LLDP
This module is used to configure LLDP function to provide
information for SNMP applications to simplify troubleshooting.
Here mainly introduces:
 Basic Config: Configure the LLDP parameters of the device.

Device Info: View the LLDP information of the local device
and its neighbors.
 Device Statistics: View the
LLDP statistics of the local
device.

LLDP-MED: Configure the LLDP-MED features.
Chapter 15 Maintenance
This module is used to assemble the commonly used system
tools to manage the switch. Here mainly introduces:
 System Monitor: Monitor the memory and CPU of the switch.
 Log: View configuration parameters on the switch.
 Device
Diagnostics: Including Cable Test and Loopback.
Cable Test tests the connection status of the cable
connected to the switch; and Loopback tests if the port of
the switch and the connected device are available.
 Network Diagnostics: Test if the destination is reachable and
the account of router hops from the switch to the
destination.
 DLDP: Monitor the physical configuration of the cables and
detect whether a unidirectional link exists.
Chapter 16 System
Maintenance via FTP
Introduces h
ow to download firmware of the switch via FTP
function.
Appendix A Glossary
Lists the glossary used in this manual.
Return to CONTENTS