268
Choose the menu Maintenance→DLDP→DLDP to load the following page.
Figure 15-11 DLDP Config
The following entries are displayed on this screen:
Global Config
Enable/Disable the DLDP function globally.
Adver Interval: Config the interval to send advertisement packets, ranging
from 1 to 30 seconds. The default value is 5 seconds.
Shut Mode: Once detecting a unidirectional link, the port can be shut down
in one of the following two modes:
• Auto: In this mode, DLDP generates logs and traps and
shuts down the corresponding port on detecting
unidirectional links, and the DLDP link state transits to
Disable.
• Manual: In this mode, DLDP only generates logs and traps if
it detects unidirectional links, and the operation to shut
down the unidirectional link ports is accomplished by the
To Next Page
Loading...
