transnorm TS 4800 - Page 84

Maintenance and repair
Replacing the swivel roller assembly
84
Operating instructions: Outfeed conveyor TS 4800
Version 3.6ENG, 27.01.2020
 Disassemble the
swivel roller
assembly
Complete the following steps:
1. Release the pneumatic tubes from the pneumatic cylinder (1).
 To do this, press down the blue circlip on the plug-in connectors.
2. Remove the joining elements (2) on both sides.
3. Remove the complete swivel roller assembly (3) from the bottom.
 Swivel roller assembly is disassembled.
1 1
2 2
3