TRENDnet Web Smart Switch Series User Manual

© Copyright 2023 TRENDnet. All Rights Reserved.
110
TRENDnet User’s Guide
Web Smart Switch Series
Using the Web Smart Switch Management Utility
The Web Smart Management Utility allows you to do the following:
• You can easily discover all TRENDnet web smart switches on your network
using the discover feature.
• You can modify the IP address settings, change the admin password, and
upgrade firmware for multiple switches.
System Requirements
Operating System: Windows® 10 (32/64-bit), 8 (32/64-bit), Windows 7 (32/64-bit), Vista
(32/64-bit), or XP (32/64-bit)
Installation
1. Download the latest version of the utility by navigating to
http://www.trendnet.com/support and selecting the switch’s model number within
the Product Download drop-down list.
2. Extract the contents of the .zip file and run the .exe installer to install the utility.
3. At the Utility installation window, click Next.
4. At the Install Location installation window, click Next.

TRENDnet Web Smart Switch Series Specifications

General

Category	Switch
Ports	8, 16, 24, or 48 ports (depending on model)
Power over Ethernet (PoE)	Available on select models
Switching Capacity	Varies by model (e.g., 16 Gbps)
Forwarding Rate	Varies by model (e.g., 11.9 Mpps)
MAC Address Table	Varies by model (e.g., 8K, 16K)
VLAN Support	Yes (802.1Q)
Quality of Service (QoS)	Yes (IEEE 802.1p)
Management	Web-based
Power Consumption	Varies by model
Dimensions	Varies by model
Weight	Varies by model