TRENDnet Web Smart Switch Series User Manual

© Copyright 2023 TRENDnet. All Rights Reserved.
40
TRENDnet User’s Guide
Web Smart Switch Series
Click Add to add the entry to the table.
In the list, you can click Modify to modify an entry or click Delete or delete the entry.
You can also click Delete All to delete all of the entries in the table. If the entries span
multiple pages, you can navigate page number in the Page field and click Go or you can
click First, Previous, Next, and Last Page to navigate the pages.
4. At the bottom of the left hand panel, click Save.
5. Select the Config you would like to save the settings to, then click Save Settings to
Flash.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.

TRENDnet Web Smart Switch Series Specifications

General

Category	Switch
Ports	8, 16, 24, or 48 ports (depending on model)
Power over Ethernet (PoE)	Available on select models
Switching Capacity	Varies by model (e.g., 16 Gbps)
Forwarding Rate	Varies by model (e.g., 11.9 Mpps)
MAC Address Table	Varies by model (e.g., 8K, 16K)
VLAN Support	Yes (802.1Q)
Quality of Service (QoS)	Yes (IEEE 802.1p)
Management	Web-based
Power Consumption	Varies by model
Dimensions	Varies by model
Weight	Varies by model