Triconex Trident - How This Guide Is Organized

xii How This Guide Is Organized
Trident Planning and Installation Guide
How This Guide Is Organized
This manual is organized into the following chapters:
• Chapter 1, “Theory of Operation” — Describes the theory of operation
supporting the controller.
• Chapter 2, “International Approvals” — Describes compliance with third-
party agencies.
• Chapter 3, “System Description” — Provides descriptions, illustrations,
specifications, and simplified schematics for components of the controller.
• Chapter 4, “Installation and Maintenance” —
Provides guidelines for the
person responsible for installing and maintaining a controller.
• Chapter 5, “Fault and Alarm Indicators” —
Provides information on
responding to alarm conditions.
• Appendix A, “Pin-Outs for Cables and Connectors”—
Provides pin-outs for
the standard cables and adapters used with the controller.
• Appendix B, “Recommended Parts for Replacement”— Lists the parts
recommended by Triconex to replace existing parts and to customize your
system.
• Appendix C, “Recommended Wiring Methods”— Provides information for
proper wiring.
• Appendix D, “Non-Incendive Circuit Parameters”—
Describes the
parameters to be used for non-incendive communication circuits in the
field.
• Appendix E, “Upgrades and Repairs”— Provides information on upgrade
procedures and special cables.
• Appendix F, “Mounting Panel Drill Template” — Provides a template for
drilling holes on a mounting panel.
• Appendix G, “EU Declaration of Conformity”— Provides a copy of the EC
Declaration of Conformity.
• Appendix H, “Warning Labels”— Provides a physical description of
warning labels required for systems in which certain hazards may occur.
• “Glossary”— Provides information for terms and topics used throughout
the manual.