Trimble Juno 5 series User Manual

Tap the Battery tab to check the battery level (see Checking the level of battery power (page 18)).
Tap the Advanced tab to set the time before the handheld turns off when idle (see Turning on and
turning off the handheld, page 19).
Sounds and notifications
Use the Sounds & Notifications control to set preferences for the speaker volume and system sounds. To
open the Sounds & Notifications control:
l
Tap / Settings/Sounds & Notifications.
To turn on or turn off sounds:
1. Tap the Sounds tab.
2. Select or clear the check boxes to enable or disable categories of sounds.
3. If you select the Screen taps or Hardware buttons check boxes, select the Soft or Loud option to
control the volume of the sounds.
4. Tap OK.
You can use predefined schemes to customize sounds, or you can create your own sound schemes.
To specify a sound scheme:
1. Tap the Notifications tab.
2. From the Event drop-down list, select an event.
3. Select the type of notification you want to receive for that event.
4. Tap OK.
You can also enable vibrations for screen taps:
1. Tap the Vibrations tab.
2. Select Screen taps and then select Short, Medium, or Long.
3. Tap OK.
Screen
Use the Screen control to align the touch screen or to change the appearance of text on the screen. To
open the Screen control:
l
Tap /Settings/System/ Screen.
To change the screen settings:
1. Tap the General tab.
2. To change the orientation of the screen, select an option in the Orientation group.
3.
To start the alignment sequence for the touch screen, tap Align Screen.
4. Tap OK.

Trimble Juno 5 series Specifications

General

Brand	Trimble
Model	Juno 5 series
Category	Handhelds
Language	English