xv
Safety
This section gives instructions to promote safe and proper handling
of Series 3080 Electrostatic Classifiers.
There are no user-serviceable parts inside the instrument. Refer all
repair and maintenance to a qualified technician. All maintenance
and repair information in this manual is included for use by a
qualified technician.
To prevent problems, take these precautions:
Do not remove any parts from the instrument unless you are
specifically told to do so in this manual.
Do not remove the instrument housing or covers while power is
supplied to the instrument.
Caution
If the Model 3080 is used in a manner not specified by the manufacturer,
the protection provided by the equipment may be impaired.
WARNING
High-voltage is accessible in several locations within this instrument.
Make sure you unplug the power source before removing the covers or
performing maintenance procedures.
Labels
The Classifier Platform has the ten labels shown in Figure S-1. They
are described below starting from the upper-left and moving
counter-clockwise.
1 Danger, High Voltage Label (interior, on the high-voltage
feedback module)
2 High Voltage Symbol Label (above the high-voltage output
connector, side of cabinet)
3 Serial Number Label (back of cabinet)
4 Caution, No Serviceable Parts Label (back of cabinet)
To Next Page
Loading...
Need help?
General
