turck BL20 - Page 346

BL20 - Communication in CANopen
D301087 0308 - BL20 CANopen4-274
The following table shows the assignment of the parameter data
bytes of the BL20-E-1SWIRE module to the manufacturer specific
objects:
The parameter bytes of the BL20-1SWIRE module are represented
completely with the objects 3064
hex
and 3069
hex
.
The sub-index of the objects must correspond to the slot of the
module in the BL20 station.
Byte no.12345678
Parameter bytes 1 to 8 of BL20-E-SWIRE
Object no.
in (hex)
3064
(see page 4-281)
3065
(see page 4-282)
3062
(only the first two bytes are shown)
3060 (only the first byte is shown)
Byte no. 9 10 11 12 13 14 15 16
Parameter bytes 9 to 16 of BL20-E-SWIRE
Object no.
in (hex)
3066
(see page 4-282)
3067
(see page 4-283)
17 18 19 20 21 22 23 24
Parameter bytes17 to 24 of BL20-E-SWIRE
Object no.
in (hex)
3068
(see page 4-282)
3069
(see page 4-282)
Note
Use the objects 3064
hex
to 3069
hex
to access all the parameter data!