UAV-1004234-001, AV-30-E Installation Manual 53
Rev H
11.2 Transponder (tailBeaconX)
For complete installation guidance, see tailBeaconX TSO
Installation Manual, UAV-1004270-001 and tailBeaconX STC
Installation Manual UAV-1003599-001.
For operation of tailBeaconX using the AV-30, see P
Guide, UAV-1004233-001.
tailBeaconX is a complete Mode S Extended Squitter (ES) ADS-B OUT
transponder, integrated with an internal SBAS/WAAS GPS and all
necessary antennas into an LED rear position light. tailBeaconX is
designed to meet the transponder and ADS-B requirements for
operating in controlled airspace worldwide, while minimizing installation
costs.
tailBeaconX can optionally provide GPS information to the AV-30,
including magnetic track and groundspeed.
For parallel connection of a tailBeaconX to two AV-30s, connect and
configure the AV-30s according to Figure 21. Note that the tailBeaconX
will only output GPS data when controlled by an AV-30. As diagramed in
Figure 21, the top AV-30 will only receive GPS data if the bottom AV-30
is powered on and configured properly.
To Next Page
Loading...
