UAV-1004234-001, AV-30-E Installation Manual 91
Rev H
4. Record your work in the aircraft log book.
11.6.4 AV-HSI Installation Materials and Tools
AV-APA installation kit includes the following components:
• One 15-pin D-Sub socket connector and shell
• One 9-pin D-Sub socket and shell
• M39029/63-368 sockets
The following additional components will be required:
• Two conductor shielded wire, 22 or 24-gauge, MIL-C-27500 or
equivalent
• Single conductor power and ground wire, 22 or 24-gauge, MIL-
W-22759/16 or equivalent
• Pins for navigator connectors. See navigator manual for
specification
• #8 fasteners appropriate to mount AV-HSI to airframe
The AV-HSI installation kit includes machined pins. These pins should
be crimped with a Daniels AFM8 crimp tool using a K13-1 positioner, or
equivalent M22520/2-01 crimp tool.
11.6.5 AV-HSI Wiring
Use the following wiring diagrams to build a harness:
To Next Page
Loading...
