uAvionix AV-30-E - 11.7 Electronic Flight Instrument System (EFIS)

UAV-1004234-001, AV-30-E Installation Manual 95
Rev H
Secure harnesses to the AV-HSI using the included screws.
Secure the AV-HSI to your airframe or panel using appropriate
fasteners, ensuring the AV-HSI and wiring does not interfere with flight
controls.
11.6.6 AV-HSI/AV-30 Configuration
Coming Soon
11.6.7 AV-HSI Ground Checkout
Coming Soon
11.7 Electronic Flight Instrument System (EFIS)
11.7.1 EFIS Overview
If the AV-30 is used as a backup instrument to a third party EFIS, the
EFIS can be connected to the system serial port (Serial 3) by connecting
AV-30 Pins 8 and 15.
When connected, user changes made on the EFIS are synchronized
with the AV-30 and vice versa.
The following user variables can be synchronized:
• Heading Bug
• Omni-Bearing Selector (OBS)
• Set Altitude (Autopilot Altitude Target)
• Set Vertical Speed (Autopilot Vertical Speed Target)
• Autopilot Mode
• Course Deviation Indicator (CDI) Source (GPS OR VLOC)
• Baro/Altimeter Setting
• Outside Air Temperature (OAT)
• Directional Gyro (DG)