UTG9000T Series Function Abitrary Waveform Generator
34
Tap Manual to step through SingleChannel/AllChannel.
When trigger source is enabled in Sweep or Burst mode, the SingleChannel function can only
work on the current channel. The AllChannel function can work on all the channel at the same
time which the channel trigger source is turned on.
10. Save
Tap Save to keep the current settings as the preview settings, it can select to keep into Set1,
Set2, Set3, Set4 and Set5.
Default
Tap Default to restore the instrument to “Factory settings”, pop-out dialog box, and tap it to
Cancel/Ok.
11. About
Display model name, version information and company address, etc.
To Next Page
Loading...
