Unify OpenScape Desk Phone CP400 - During Calls

101
€ Select the required line.
Confirm line 2 for example.
Press the Function key
1
. The connection is set up.
Forwarding calls for the primary line
Call forwarding can only be activated for the primary line. Which call forwards
are possible, how they are configured and activated can be found from
 page 137.
Call forwarding information
If you have activated one of the forwarding types on your phone for the primary
line and a subscriber calls, an information window with the following information
opens:
Call from x forwarded to x
Dialing using the hot or warm line function
If you lift the phone's handset or press the loudspeaker key, a number specified
by the administrator is dialed
• immediately in the case of a hot line or
• after a specific time with a warm line.
Examples:
• The phone in the elevator immediately dials the reception number.
• The phone at a patient's bed dials the ward number after one minute, for ex-
ample, if no other number is dialed.
During calls
Making and receiving calls on a single line
If you only use one line on your multi-line telephone to make calls, and you re-
ceive calls on the same line, the phone operates in the same way as a single-
line telephone:
• Number redial
 page 65
• Consultation
 page 69
• Toggle/Connect
 page 71
• Callback
 page 65
•Hold
 page 73
• Call waiting (second call)
 page 73
• Transfer call
 page 75
• Conference
 page 71
Functions available exclusively for the primary line:
• Voicemail
 page 82
ù
Line 2
Available
ü
_
â Redial ã
_
1. Please note the information in relation to the call log  page 162.
ñ
Your administrator has activated "Forwarding shown".
ñ
Your administrator can configure a hot line or warm line for your phone.