Unify OpenScape Desk Phone CP400 - Resetting Keys

91
Resetting keys
Here you can reset keys you configured back to factory settings (see also
 page 136).
@ Press the key shown if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Activate with the Softkey if appropriate if you really want to delete the contents
of the programmed keys.
Select the Softkey to delete the key programming immediately. The contents of
the keys you configured are deleted.
Settings
_
$
User settings
-
_
$
Reset
-
_
Key programming
¦_
Reset selected user data
-
_
Keys that can only be configured by the administrator remain unchanged.