Unify OpenScape Desk Phone CP400 - Incoming Calls; Making Calls

99
Incoming calls
Answering calls for the primary line
The phone rings. The caller and the relevant line are displayed. The Notification
LED flashes.
Press the flashing key for the primary line and use speakerphone mode.
or
Press the Softkey and use speakerphone mode.
or
^ Lift the handset. You have answered the call.
Answering calls for a secondary line
Prerequisite: The secondary line is configured on your multi-line telephone.
The phone rings. The caller and the relevant line are displayed. The Notification
LED flashes.
Using the handset
^ Lift the handset.
You have answered the call.
Using the line keys
Press the flashing key for the secondary line and use speakerphone mode.
or
Press the Softkey and use speakerphone mode.
Making calls
You can seize a line before dialing on a MultiLine phone.
ë Incoming call
ø
Thomas Meier
1234954
Line 1
£
Answer
O
_
ë Incoming call
ù
Thomas Meier
1234954
The line that rings is automatically selected. If calls are ringing on more
than one line, you will be connected to the line that has been ringing the
longest.
Line 2
£
Answer
O
_
ñ
Line seizure can be configured on an individual basis. Your administrator
can determine if the lines on your telephone can be automatically seized
and with which priority.
If you have seized a secondary line, this line is reserved for you for making
calls for a specific period as defined by the administrator. No other user
can seize this line during this period, even if the line is also assigned to this
user's telephone.