Unify OpenScape Desk Phone CP400 - Key click

56
• Handset
• Headset
• Handsfree
• Rollover
• Group pickup beep
z You can also configure this setting via the web interface  page 172.
@ Press the key shown if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
Open the Handset
for example with the Softkey
1
.
Use the Softkey to increase the volume.
or
Use the Softkey to decrease the volume.
or
" Adjust using the toggle key.
Save the setting by selecting the Softkey.
Exit the display menu if appropriate.
Key click
You can select here whether a tone should be heard when a key is pressed. You
can also decide whether this should apply for all keys or only those on the key-
pad. In addition, you can adjust the tone volume or disable the tone.
z You can also configure this setting via the web interface  page 172.
@ Press the key shown if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Settings
_
$
User settings
-
_
$
Audio
-
_
Volumes
-
_
Handset
K
_
1. The phone displays the current setting
Increase
X
_
Decrease
Œ
_
Q
_
¿
_
Settings
_
$
User settings
-
_