Unify OpenScape Desk Phone CP400 - Allowing Call Waiting

151
Allowing call waiting
Prerequisite: The option was programmed by your administrator.
z You can also configure this setting via the web interface  page 172.
@ Press the key shown if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
Open using the Softkey.
Enable or disable using the Softkey.
Save the setting with the Softkey.
Assuming Allow call waiting is activated, you can toggle a configured key to
switch call waiting on/off (
 page 90).
If the call waiting (second call) function is deactivated, a caller hears the
busy signal if you are already making a call.
Settings
_
$
User settings
-
_
$
Configuration
-
_
$
Incoming calls
-
_
Handling
-
_
Allow call waiting
¢_
Q
_