Unify OpenScape Desk Phone CP400 - Activating;Deactivating Hold and Hang-Up

147
Activating/deactivating Hold and hang-up
This function works in the following call scenarios:
• You have placed a call on hold and hang up.
• You are making a consultation call and the second party hangs up.
• You have answered a second call and you or the second party hangs up.
You can use "Hold and hang-up" to determine whether you will be prompted im-
mediately or after a defined time to retrieve the held call.
z You can also configure this setting via the web interface  page 172.
@ Press the key shown if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec.
j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
€ Switch to Hold and hang-up.
Enable or disable using the Softkey.
Save the setting with the Softkey.
This function cannot be used on multi-line phones.
Settings
_
$
User settings
-
_
$
Configuration
-
_
Connected calls
-
_
Hold and hang-up
¢_
Q
_