60
Suggestions for using speakerphone mode:
• Adjust the call volume while speakerphone mode is active.
• The ideal distance between the user and the phone in speakerphone mode is
50 cm.
Answering a call via the headset
Prerequisite: A headset is connected.
Answering calls via the headset key
The phone rings. The caller is displayed. Only the LED on the ² key flashes.
² Press the key shown.
if nec.
" Adjust the call volume page 21.
Answering calls automatically via the headset
Press the Function key to activate automatic call answering. The key LED and
the headset key illuminate.
A short acoustic signal is heard on the headset for a call and the connection is
established.
If you want to manually answer calls again, deactivate the automatic answering
function using the "Auto-Headset" key. Both keys are off.
Rejecting a call
You can reject an incoming call.
Prerequisite: An incoming call is displayed or signaled. The function is ap-
proved by the administrator.
Press the Softkey. The caller hears a busy signal.
Make sure your headset port is set up properly page 117.
¹ Incoming call
Thomas Meier
1234954
The administrator has additionally configured a Function key with the "Au-
to-Headset" function (AICS Zip tone) (
page 86).
Auto-Headset
_
Reject
P
_
The rejected caller is saved in the conversations list as a missed call. You
can then call this party back at a later time.
To Next Page
Loading...
