Unify OpenScape Desk Phone CP400 - Setting Headset Port Use

117
Open using the Softkey
1
.
Confirm with the Softkey to switch.
Save the setting with the Softkey.
Setting headset port use
z You can also configure this setting via the web interface  page 172.
@ Press the key shown if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
€ Select the headset port.
Open using the Softkey
2
.
You will be offered the following options:
• Wired headset
• Cordless headset
• Conference unit
Confirm with the Softkey to switch.
Save the setting with the Softkey.
Open listen-
US mode
K
_
1. The phone displays the current setting
Standard mode
¥
_
Q
_
Settings
_
$
User settings
-
_
$
Audio
-
_
Settings
-
_
Headset socket
K
_
2. The phone displays the current setting
Wired headset
¥
_
Q
_