Unify OpenScape Desk Phone CP400 - Diagnostic Data

169
Diagnostic data
This information overview in the user area of the service menu provides you with
information on the current configuration of the telephone:
@ Press the key shown if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey. You see a numbered list of telephone parameters with
the current settings.
You can see a more structured view of the list via the web interface
 page 172:
Example:
Settings
_
$
User settings
-
_
Diagnostic information
-
_
Diagnostic data
5/11/2011 8:23:40 AM
00 terminal.number: 3339
01 sip.server: 192.168.1,240
02 sip.port: 5060
03 sip.registrar: 192.168.1,240
04 sip.registrar.port: 5060
05 sip.gateway: 192.168.1,240
06 sip.transport: UDP
07 sip.gateway.port: 5060
08 server.features: No
09 dns.results: 5060
10 multiline: No
11 registered.lines: 5060
12 backup.active: Yes
13 backup.proxy:
14 software.version: V3 R0.22.0 SIP 110502
15 display.message: None
16 last.restart: 2011-05-11T08:00:34
17 memory.free: 60696K free
18 ip.address: 192.168.1,235
19 subnet.mask: 255.255.255.0
20 default.route: 192.168.1.2
21 primary.dns: 192.168.1,105
22 secondary.dns: 192.168.1.2
23 route.1.ip:
24 route.1.gateway: None
25 route.1.mask: None
26 route.2.ip: None