71
Switching to the held party (alternating)
Prerequisite: You are making a consultation call page 69 or have accepted
a second call
page 74. You are in the call connection menu.
Press the Softkey.
Ending an alternate operation
Press the Softkey. The active call is disconnected.
Conference
Prerequisite: You are making a consultation call page 69 or have accepted
a second call
page 73 and the conference function is allowed page 159.
Establishing a conference
+ or —
Press the Softkey – the conference is started. You are connected to both parties
at once. The conference is displayed.
Querying information on subscribers
Press the Softkey to display the subscribers.
€ Select the subscriber.
The subscriber is busy.
« Open the subscriber information.
End conference
Allowing call partners to continue a conference after you exit
Prerequisite: The function "Allow joining in a local conference" (
page 160)
was activated.
Alternate
R
_
You can switch back and forth between two parties by repeatedly confirm-
ing "Alternate".
End & reconnect
P
_
You can initiate a conference by calling the "Conference" function in the
context menu of either the active or held call. You can alternatively press
a configured Conference key.
If you are already involved in a secure connection with a party when you
initiate a consultation call, the original party is placed on hold. The new
consultation connection can be either secure or unsecured. However, the
first connection remains secure even if all three parties are now joined to-
gether in a conference.
The entire conference is nonsecure if the connection to at least one of the
parties is not secure.
The relevant padlock icon appears in the "Conference" row.
Start conference
r
_
Participants
r
_
User
-
To Next Page
Loading...
Need help?
General
