90
Using keys
A function or selected dialing can be programmed on the first or the second lev-
el.
Press "Shift" if necessary to switch level.
Example 1: Calling saved number
Prerequisite: The idle menu is shown on the display.
Press the Function key for a saved number. The connection is set up.
Example 2: Activating/deactivating Call waiting
You can press a key to activate or deactivate call waiting functionality, even
during a call. The prerequisite for this is that a second call is permitted
(
page 151). A second call is allowed by default.
Press the Function key shown. The key LED is no longer illuminated. The sec-
ond call function is deactivated. The call is rejected or forwarded.
Example 3: Holding and retrieving
You can hold a call using a key and retrieve it again.
Press the Function key. The key LED lights up red. The call is now on hold.
Press the Function key shown. The key LED is no longer illuminated. The call is
retrieved.
Example 4: Immed ring
This function allows you to switch the preset delay ( page 104) on and off for
all line keys. By default the delay is set, the key does not illuminate.
Press the Function key. The key illuminates. The delay ringer is disabled. An in-
coming call rings immediately regardless of what delay time is configured.
Shift
_
Party
_
Call waiting
¤
Hold
_
Hold
£
Immediate ring
_
To Next Page
Loading...
