Unify OpenScape Desk Phone CP400 - Page 104

104
Example of details for a configured line
Setting the time for a delayed ringer
Specify the length of time before a held call should be signaled on a line.
z You can also configure this setting via the web interface  page 172.
@ Press the key for the main menu if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
Open using the Softkey.
Select the required line (e.g. primary line) and open using the Softkey.
Open using the Softkey
1
.
Ring delay
Hot/warm action
Hot/Warm line destination
12
Details for keyset line x: Line 1
Hot line
3339
Ring on/off
Selection order
3336
Details for keyset line x: Line 1
Hot line
1
Settings
_
$
User settings
-
_
$
Configuration
-
_
$
Keyset
-
_
Lines
-
_
Primary line
-
_
Ring delay
4
K
_
1. The phone displays the current setting