Unify OpenScape Desk Phone CP400 - Beginning Programming; Programming Enhanced Functions

88
Beginning programming
Open using the Softkey.
or
Open using the Softkey.
€ Choose the function to be programmed on the key.
Confirm with the Softkey to set the function, for example Do not disturb.
If you do not want to accept the standard function labeling:
Open using the Softkey.
The input field is displayed.
j Enter the function label you want and confirm with the Softkey.
Save the programming with the Softkey.
Programming enhanced functions
Repertory dialing
Hold down the Function key to which a function should be assigned until the pro-
gramming prompt is displayed.
Confirm with the Softkey.
Open using the Softkey.
€ Choose the function to be programmed on the key.
Confirm with the Softkey to set the function. If you do not want to accept the stan-
dard function labeling, rather would prefer to use the name of the subscriber,
then:
Open using the Softkey.
The input field is displayed.
j Enter the label you want and confirm with the Softkey.
Use the Softkey to open the input field for the destination phone number.
Normal
Unallocated
K
_
Shifted
Unallocated
K
_
Do not disturb
¥
_
Label
K
_
¾ Q
_
Q
_
_
If the prompt is not displayed or a programmed function is not executed,
you can only launch key programming via the user menu (consult your ad-
ministrator about the current setting).
OK
Q
_
Normal
Unallocated
K
_
Repertory dial
¥
_
Label
K
_
¾ Q
_
Setting
K
_