Unify OpenScape Desk Phone CP400 - Settings for Autodial Delay

154
Settings for autodial delay
z You can also configure this setting via the web interface  page 172.
If you select Autodial delay (s), you must either confirm with the Softkey or wait
until the autodial delay expires to set up a call when dialing with the handset on
hook.
@ Press the key shown if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
The current setting is displayed. Open using the Softkey.
€ Select a new time.
Confirm with the Softkey to set the new time.
Save the setting by selecting the Softkey.
The setting does not affect automatic emergency number dialing.
Settings
_
$
User settings
-
_
$
Configuration
-
_
Outgoing calls
-
_
Autodial delay (s)
3
K
_
5
¥
_
Q
_
Automatic dial delay does not work if you are using a dial plan and Sofort-
wahl is configured (see
 page 157). The number is automatically dialed
as soon as the string entered matches an entry in the dial plan.