Unify OpenScape Desk Phone CP400 - Deflecting a Call; Responding to a Callback

61
Deflecting a call
Prerequisite: An incoming call is displayed or signaled. The function is ap-
proved by the administrator.
Press the Softkey. The conversations view is opened.
If a destination phone number is programmed, it will appear as the top entry in
the list
 page 150. Press the Softkey to dial this number.
or If you did not save a phone number when programming call deflection, or if you
want to use a different destination, you are now prompted to enter a destination
phone number for call deflection.
j Enter the alternative phone number.
Confirm with the Softkey. The call is deflected.
Responding to a callback
Prerequisite: A callback was requested. Your phone rings and the subscriber
information appears on the graphic display.
Accepting a callback
Press the Softkey.
Rejecting a callback
Press the Softkey.
The callback request is deleted. The caller's phone number is added to the
missed calls list.
Deflect
D
_
123456789
Ô
_
©
Deflect to...
A
©
082631565
Ô
_
Accept
O
_
ñ
The Reject function is approved by the administrator.
Reject
O
_