166
Recording calls
Automatic call recording
This is the simplest mode. If you have accepted a call or called a subscriber and
the subscriber answers, the call is recorded automatically. Refer to
page 165
to check which calls this can be.
As soon as the recording starts, you will see the recording symbol
| on the dis-
play and hear a beep (see also
page 165).
You cannot pause the recording manually in this mode.
Manual call recording
Activating or deactivating call recording when the telephone is in idle
mode.
Prerequisite: Manual mode is selected. The recording button is configured and
indicates the status.
Press the Function key to activate – the LED lights up.
Or press the Function key shown to disable the option - the LED turns off.
The recording button also indicates the status change if you activated or deacti-
vated call recording using the Softkey.
Call recording with AutoStart
Standby mode is activated in principle in idle mode. The recording button LED
lights up. You cannot switch off the recorder. As soon as a call is set up, call re-
cording starts automatically.
^ Lift the handset.
or
: Press the key shown.
[ The subscriber answers. You hear a beep, the recording symbol | is shown on
the display and the recording button LED remains lighting. The call is now being
recorded. (see also
page 165)
You can pause the recording at any time and continue it again.
] or É If you end the call, the AutoStart process is set up again for the next call.
Controlling call recording
Starting call recording manually during a call
Prerequisite: Manual mode or AutoStart is selected. You are making a call. Re-
cording has not started. The recording button LED is not lighting.
[ You are making a call (see also page 165).
Press the Softkey to activate – the LED lights up.
You hear a beep and the recording symbol
| is shown on the display. The call
is now being recorded. (see also
page 165)
Recording
_
Recording
¤
Call recording
ƒ
_
To Next Page
Loading...
