142
Defining the ring duration before call forwarding on no
reply
You can define how long the phone should ring before "No reply (after xs)" call
forwarding activates.
\ Open the Presence menu.
« Open the Forward to menu.
Open the Forwarding controls menu.
€μ Select the forwarding type.
Here for instance No reply (after xs).
« And open it.
€μ Select Set delay (seconds).
Open the input field with the Softkey (
page 23).
The input field is displayed.
j Enter the required time in seconds and confirm your entry with the Softkey.
Save your input. The new time is displayed.
\ Exit the Presence menu if appropriate.
Call forwarding chain
Sometimes calls to a subscriber are forwarded to another subscriber who also
has call forwarding or DND activated. This can create a call forwarding chain
consisting of several telephones where the last member of the chain is your
phone.
The following forwarding information is shown on your telephone's display:
• Who is calling.
• Who forwarded first or last.
• The reason for the forwarding is displayed by an icon.
You can set whether the subscriber who forwarded first or last is displayed (see
page 79).
This setting is only available if the "Server features" function was deacti-
vated by the administrator.
All calls
-
¦_
Forwarding controls
-
_
No reply (after xs)
-
¦_
Delay (seconds)
K
_
©
16
Q
_
Q
_
To Next Page
Loading...
