Unify OpenScape Desk Phone CP400 - Programming a Key; Initiating Programming

87
Programming a key
Initiating programming
Directly via the key
Hold down the Function key to which a function should be assigned until the pro-
gramming prompt is displayed.
Press the Softkey to open the programming.
or
Via the user menu
You can also program keys via the user menu.
@ Press the key shown if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec. j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey. You are prompted to press the key you wish to program.
Press the Function key you want to program with a function. The key LED lights
up constantly.
_
If the prompt is not displayed or a programmed function is not executed,
you can only launch key programming via the user menu (consult your ad-
ministrator about the current setting).
OK
_
Settings
_
$
User settings
-
_
$
Phone
-
_
Program keys
-
_
_