Unify OpenScape Desk Phone CP400 - Privacy;Security; Do Not Disturb; Enabling Do Not Disturb Via the Presence Menu; Enabling Do Not Disturb Via a Key

109
Privacy/security
Do not disturb
If "Do not disturb" is activated, your telephone will not ring. The caller hears the
busy tone or an announcement that the called party cannot accept any calls at
present. Do not disturb can be activated/deactivated using a specially pro-
grammed key or also from the idle menu.
Enabling do not disturb via the Presence menu
\ Press the key shown.
Enable or disable using the Softkey.
Enabling do not disturb via a key
Prerequisite: To activate "Do not disturb", a key has to be assigned the "Do not
disturb" function
 page 86 and the "Do not disturb" function has to be allowed
 page 109.
Press the Function key.
Press the key with the illuminated LED once more to deactivate the function.
Allowing "Do not disturb"
z You can also configure this setting via the web interface  page 172.
@ Press the key shown if appropriate.
Open using the Softkey.
Open using the Softkey.
if nec.
j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
Open using the Softkey.
Activate with the Softkey.
Save the setting by selecting the Softkey.
Do not disturb
¢_
Do not disturb
_
Do not disturb
¤
Settings
_
$
User settings
-
_
$
Configuration
-
_
Incoming calls
-
_
Handling
-
_
Allow DND
¢_
Q
_