62
Making calls
You make a call by entering the phone number of the relevant party using the
dialpad or by searching for this party in the permanent Conversations list. Con-
versations include:
• Dialed and received calls
• Subscribers from Circuit
• Subscribers from Exchange
• Subscribers from a corporate directory
If you cannot find received or dialed calls in the list, check if the call log is acti-
vated.
Off-hook dialing
^ Lift the handset.
The input field in Conversations is opened in numeric mode.
j Enter the phone number.
Z Confirm that the phone number is complete or wait until the autodial delay ex-
pires (see
page 66).
or
The required contact is shown in the list. Confirm with the Softkey. The connec-
tion is set up.
On-hook dialing
The connection is set up with on-hook dialing via a connected headset or via the
loudspeaker (speakerphone mode). The line is seized before dialing. Use the
search function in Conversations if appropriate (
page 37).
j Enter digits via the dialpad.
or
. Press the key if a headset is connected.
or
: Press the key shown.
j Enter or complete the phone number.
If you allowed the option "Busy When Dialing" page 155, you will not be
interrupted by an incoming call. In this case, the caller hears the busy sig-
nal.
©
Dial a number...
A
©
082631565
O
Peter Maier O
_
©
A
To Next Page
Loading...
