Unify OpenScape Desk Phone CP400 - Picking up the Group Call Only Using the Key; Picking up a Group Call Immediately; Picking up a Group Call; Ignoring a Group Call

93
Picking up the group call only using the key
A group call is waiting. The Anrufübernahme key flashes. The group call is not
shown on the display.
Press the Function key shown.
The group call is now shown on the display with
Pickup: Caller
for: Party
The pop-up menu opens:
Picking up a group call immediately
A group call is waiting and is shown on the display with
Pickup: Caller
for: Party
Picking up a group call
A group call is signaled.
Confirm with the Softkey.
or
^ Lift the handset (only if the appropriate function is set by your administrator).
or
Press the Function key or press it again if call answering was initiated via the
key. The speakerphone function is activated. Prerequisite: The "Anrufüber-
nahme" key was programmed on the connected key module.
Ignoring a group call
Press the Softkey. The phone stops signaling the group call. It can still be an-
swered however from the conversations list.
ñ
Your administrator has set up the group call such that it is only displayed
by the Anrufübernahme key flashing. The phone can also ring when idle.
Call pickup
£
ñ
Your administrator has set up the group call such that it will be shown im-
mediately on the display.
¹ Incoming call
Pickup call
O
_
Call pickup
_
Ignore
]
_