Unify OpenScape Desk Phone CP400 - Page 14

14
Information displayed for a selected conversation
If a conversation (contact and history at the same time) is selected in the list, it
will be highlighted in green. This description is only used if it aids understanding.
This is usually what is displayed:
Confirm the selected contact with the Softkey to establish the connection or with
the
« key to open the context menu.
Information displayed for a non-selected conversation
A conversation is displayed in a light color if it is not selected. This description is
only used if it aids understanding. This is usually what is displayed:
Call directly with the Softkey to establish the connection.
Navigation and action in lists
€ μ Select an option from the selection list and move up and down the list using the
Navigator keys.
€ Skip to the end of the list by pressing and holding the key shown.
μ Skip to the start of the list by pressing and holding the key shown.
^ Go back.
« Open contacts and details. Go down a level.
_ Execute the Softkey action in the list element.
Z Has the same function as with the Softkey but only applies for a selected ele-
ment.
OpenScape Desk Phone CP400 and OpenScape Key Module 400
Functions and phone numbers can be programmed on the keys for the tele-
phone and the key module.
The OpenScape Desk Phone CP400 or OpenScape Key Module 400 key shown
here is referred to as a Funktionstaste in the User Guide. Refer to the instruc-
tions on
 page 179 as regards the labeling.
Daniel Bernoulli - 11:22
O
b
Received call x, (1:35:50 AM)
Daniel Bernoull
-
O
_
Andre-Marie Ampere
11:22
O
b
Received call x
Andre-Marie Ampere
O
_
Call waiting
_