178
Messages during Fernkonfiguration
If an error occurs during Fernkonfiguration, it will be reported on the display. For example:
The following error codes are possible:
In such cases, please contact your administrator and specify the error code.
To correct any other problems:
Contact your administrator first if a fault persists for more than five minutes, for example. Pass on
the message displayed in the red field, if appropriate, as shown in the next example. Problems that
cannot be corrected should be referred to Customer Service.
"
Ladefehler AU
Code Priority Description
AU 1
Canceled by user
Appears if the PIN entry was rejected
RS 1
The IP address of the Unify Vermittlungrechner cannot be retrieved.
DNS query failed.
RN 3
A connection cannot be established to the Unify Vermittlungrechner
– No response
RR 2
A connection cannot be established to the Unify Vermittlungrechner
– Rejected
RU 1
A connection cannot be established to the Unify Vermittlungrechner
– Not authorized
RO 3
A connection cannot be established to the Unify Vermittlungrechner
– No or invalid OCSP response
RV 2
A connection cannot be established to the Unify Vermittlungrechner
– Certificate invalid
DS 1
The IP address of the deployment server cannot be retrieved.
DNS query failed.
DN 3
A connection cannot be established to the deployment server.
– No response
DR 2
A connection cannot be established to the deployment server.
– Rejected
Conversations
Settings
Tuesday 17 Nov. 2015
Voicemail
No telephony (RF2)
To Next Page
Loading...
