Sending Functions
5-26
Enter E-mail Subject and Body
When sending E-mail, enter the subject and body of the
E-mail.
Use the procedure below to enter the subject and body
for an E-mail message and then send the E-mail.
1 Press the Send key.
2 Press [Advanced Setup] and then [E-mail Subject/
Body].
3 Press [Subject].
4 Enter the subject, and press [OK].
NOTE: Up to 60 characters can be entered for the
subject.
5 Press [Body].
6 Enter the body and press [OK].
NOTE: Up to 500 characters can be entered for the
body.
7 Press [OK].
8 Specify the destination, and press the Start key to
start sending.
To Next Page
Loading...
