Utax CDC 1730 - Developer Refresh; Laser Scanner Cleaning; Mp Tray Cleaning

Default Setting (System Menu)
8-53
8
Developer Refresh
When the printing is too light or incomplete, even though there is enough toner, refresh the developer.
1 Press the System Menu key.
2 Press [ ], [Adjustment/Maintenance], [ ] and then [Next] of Developer Refresh.
3 Press [Execute]. Developer Refresh begins.
NOTE: Waiting time may be longer when the toner is refilled during developer refresh.
4 Press [OK] after Developer Refresh is complete.
Laser Scanner Cleaning
If white or color streaks appear on images, perform Laser Scanner Cleaning.
1 Press the System Menu key.
2 Press [ ], [Adjustment/Maintenance], [ ] and then [Next] of Laser Scanner Cleaning.
3 Press [Execute]. Laser Scanner Cleaning begins.
4 Press [OK] after Laser Scanner Cleaning is complete.
MP Tray Cleaning
If dirt appears on images when using the multi purpose tray, perform MP Tray Cleaning.
1 Press the System Menu key.
2 Press [ ], [Adjustment/Maintenance], [ ] and then [Next] of MP Tray Cleaning.
3 Load two sheets of A4 or Letter paper in the multi purpose tray.
4 Press [Execute]. MP Tray Cleaning begins.
Press [OK] after MP Tray Cleaning is complete.