EasyManuals Logo

Utax CDC 1730 User Manual

Utax CDC 1730
436 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #315 background imageLoading...
Page #315 background image
Default Setting (System Menu)
8-75
8
6 Press [OK].
7 After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to Restarting the System on page 8-72.
Protocol Detail
The table below lists the network related function settings. The network related functions are available when
TCP/IP is On.
Item Description
Default
Setting
Restarting
the System*
* Y: The machine must be restarted after the setting is changed.
N: The machine does not need to be restarted after the setting is changed.
NetBEUI Selects whether or not to receive documents using
NetBEUI.
On Y
LPD Select whether or not to receive documents using LPD as
the network protocol.
On Y
SMTP
(E-mail TX)
Select whether or not to send e-mail using SMTP. Off N
POP3
(E-mail RX)
Select whether or not to receive e-mail using POP3. Off N
FTP Client
(Transmission)
Select whether or not to send documents using FTP.
When selecting [On], set the FTP Port Number. Use the
FTP default port 21.
On
Port:21
Y
FTP Server
(Reception)
Select whether or not to receive documents using FTP. On Y
SMB Client
(Transmission)
Select whether or not to send documents using SMB.
When selecting [On], set the SMB default Port Number.
Use the SMB default port 139. For Windows Vista, use 445.
On
Port:139
N
i-FAX Select whether or not to use i-FAX. On N
LDAP Select whether or not to use LDAP. Off N
SNMP Select whether or not to communicate using SNMP. On Y
SNMPv3 Select whether or not to communicate using SNMPv3. Off Y
HTTP Select whether or not to communicate using HTTP. On Y
HTTPS Select whether or not to communicate using HTTPS.
SSL must be set to [On] in SSL Setup on page 8-77.
On Y
IPP Select whether or not to communicate using IPP. When
selecting [On], set the IPP default Port Number. Use the
IPP default port 631.
Off
Port:631
Y
IPP over SSL Select whether or not to use IPP over SSL.
SSL must be set to [On] in SSL Setup on page 8-77.
Off Y
Raw Port
Select whether or not to receive documents using Raw Port.
On Y

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Utax CDC 1730 and is the answer not in the manual?

Utax CDC 1730 Specifications

General IconGeneral
BrandUtax
ModelCDC 1730
CategoryAll in One Printer
LanguageEnglish

Related product manuals